IMPORTANT: Please be sure to review the add-on options above to confirm you have all accessories necessary for your particular installation.
The WhisperKOOL Ceiling Mount 9000 Twin Split wine cellar refrigeration system is a great solution for larger wine cellars where ventilation is a challenge and compressor noise is a concern. This cooling system includes two evaporators that can fully recess into the ceiling cavity to virtually disappear - even the face of the units can be painted to blend with the ceiling colour.
A split refrigeration system separates the evaporator from the condenser. The WhisperKOOL Ceiling Mount 9000 Twin Split evaporators are recessed into the ceiling of the wine cellar and the condenser is located within 100 linear feet of the evaporator (outside of the wine cellar). The evaporators are connected to the condenser by refrigerant piping. Most customers choose to install the condenser unit outdoors to avoid heat or noise transmitting indoors.
This split wine cellar refrigeration system offers the new 220V condenser with 50% more efficient operation. Note that 220V condensers are wall-mounted and can be placed outdoors without the need to purchase separate exterior housing.
Installing technicians will appreciate that the electrical wiring, bottle probe wiring, and line set are now all located at the bottom of the unit and easier to access. Flare fittings are also standard so no brazing is required in the field. The redesign includes e-coated duramax evaporator coils which enhance performance, and a new hex mesh grille with an air filter to protect the unit from the intake of potentially harmful debris during the initial start-up.
Please note that all split refrigeration systems require installation by a qualified HVAC-R technician. Failure to have the system installed by a qualified technician may compromise its operation and will void the warranty.
Engineered for extreme environments - condenser units can be placed outdoors and exposed to temperatures as high as 110°F and as low as 0°F. They can handle a 55°F temperature differential between the cellar and condenser environment.
- Advanced electronic display panel - digital controller is wired to the unit but can placed in the location of your choosing on the wall.
- Optional 24V thermostat/controller - choose the 24V conversion kit add-on to supply your own smart controller (note that technical support is not provided by WhisperKOOL for operation of outside controllers).
- Excellent efficiency - draws in the warmer air that accumulates at the ceiling, cooling and dispersing the air throughout the wine cellar.
- Bottle probe - measure liquid temperature inside a wine bottle disguised in your wine racking (not included with 24V conversion kit add-on)
- Duramax coils - e-coated to improve system performance. An additional coating to prevent against corrosion can be added (see add-on options). This add-on is highly recommended for areas close to marine influences.
- Easy installation - flare fittings are standard. Note that installation must be completed by a licensed HVAC technician to validate the warranty.
- Almost invisible - the evaporator can fully recess into the cellar ceiling and the grille is paintable to blend in with the ceiling colour, if you wish. Otherwise, it comes in a standard matte black finish.
- 2 Speed Fan Switch - Turn to high for maximum cooling power or low for quieter fan operation.
- Allows for maximum bottle storage - no need to cut out wine racking around a wall-mounted cooling unit or wall grilles.
|Cellar Size (assuming proper insulation - no glass)||3000 cubic feet|
BTU/h (85° F condenser air intake temperature)
8631 (high fan speed)
Dimensions (Evaporators, Ceiling Mounted Inside Cellar x 2): 35.75"L x 14.5"W x 12.75" H
Dimensions (Condenser, Unit Outside Cellar): 31.18"L x 10.75"W x 21.18"H
Voltage Rating: Evaporator = 120V (15 amp dedicated circuit required), Condenser = 220V (15 amp dedicated circuit required)
Weight: 66lbs (evaporators x 2), 64lbs (220V condenser)
Amps: Evaporator = Primary 1.74 (Running Amps); Secondary 1.04 (Running Amps), Condenser = LRA 20, RLA 4.25, FLA 4.89
Drain Line: 1/4” ID clear plastic tubing (not provided - rigid tube recommended)
Ducting: This is not a ductable unit
Orders of this item are typically shipped anywhere from 3 - 15 business days from the date of order. If you would like a more specific estimate, please contact us.
Smaller refrigeration units will be shipped by common carrier such as Fedex or UPS. Larger refrigeration units or systems will be shipped on a pallet via an LTL freight carrier and delivered curbside with a power tailgate. Shipping may take anywhere from 1 - 2 weeks, depending on your location.
Please note: If this unit is on backorder or subject to lead times longer than 15 business days, it will be noted in the main product description.
This product is warrantied by WhisperKOOL
Two (2) Year Limited Warranty
For the period of TWO (2) YEARS (the “Limited Warranty Period”) from the date of original sale of a Product by WhisperKOOL, if a WhisperKOOL Product is found to be defective in material or work-manship after undergoing WhisperKOOL’s customer service troubleshooting, then, subject to the WhisperKOOL Product Limited Warranty Limitations and Exclusions as well as the other Terms and Conditions stated herein, WhisperKOOL will do the following, as appropriate, for the end user (“End User”) who has installed and is actually using the Product, with regard to LABOR, PARTS and FREIGHT:
1. LABOR - repair or replace (at WhisperKOOL’s sole option) the Product to the End User; and
2. PARTS – supply to the End User, new or rebuilt replacement parts for the Product in exchange for the return of defective parts; and
3. FREIGHT – cover normal ground freight charges for parts, and, in the event the Product is not repairable in the field, cover normal ground freight charges (within the continental United States) for the repair or replacement of the Product.
Five (5) Year Compressor Limited Warranty
WhisperKOOL Products’ compressor only will be covered for five (5) years from date of purchase. Labor and freight of the compressor is the End Users responsibility.
Product Warranty Limitations and Exclusions:
This limited warranty does not cover cosmetic damage caused during installation, damage due to acts of God, commercial use, accident, misuse, abuse, negligence, or modification to any part of the Product.Delivery and installation of the Product, any additional parts required, as well as removal of the Product if warranty work is required, are all at the sole cost, risk and obligation of the End User.
This limited warranty does not cover damage due to improper installation or operation or lack of proper maintenance of the Product, connection of the Product to improper voltage supply, or attempted repair of the Product by anyone other than a technician approved by WhisperKOOL to service the Product.
This limited warranty does not cover any Product sold “AS IS” or “WITH ALL FAULTS.”
Product that has been replaced during warranty period does not extend the warranty period past the original date of purchase.
Proof of purchase of the Product in the form of a bill of sale, receipted invoice or serial number, which is evidence that the Product is within the Limited Warranty Period, must be presented by the End User to WhisperKOOL in order to obtain limited warranty service.
This limited warranty is void if the factory applied serial number has been altered or removed from the Product.
This limited warranty is voided if installed in an enclosure of insufficient design that does not follow the Product installation requirements stated herein and in the owner’s manual.
Removing the rivets from the Product’s unit housing without prior authorization from WhisperKOOL voids this limited warranty.
The End User must first contact WhisperKOOL Customer Service by telephone (at 1-800-343-9463) prior to attempting service on any Product still under the limited warranty; else the limited warranty is voided.
This limited warranty does not cover Product being concealed by, but not limited to, vegetation, fabric, shelving, mud, snow, or dirt. Product must not be painted or limited warranty will be void.
This limited warranty does not cover exposure to corroding environments such as, but not limited to, petroleum and gasoline products, cleaning solvents, caustic pool chemicals, and marine air.
This limited warranty does not cover any cause not relating to Product defect.
THE REPAIR OR REPLACEMENT OF THE PRODUCT AS PROVIDED UNDER THIS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF YOU, THE END USER, AS WELL AS ANYONE ELSE IN THE CHAIN OF TITLE OF THE PRODUCT, DOES NOT START A NEW LIMITED WARRANTY TIME PERIOD, AND IS IN LIEU OF ALL OTHER WARRANTIES (EXPRESS OR IMPLIED) WITH REGARD TO THE PRODUCT. IN NO EVENT SHALL WHISPERKOOL BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, SPECIAL OR CONTINGENT DAMAGES FOR BREACH OF ANY EX-PRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXPRESSLY DISCLAIMED.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may have other rights, which vary from state to state.
Failure of the End User to comply with all of the Product Installation Requirements, Maintenance Requirements and End User Requirements may, at WhisperKOOL’s sole discretion, void this limited warranty.
No one has any authority to add to or vary the limited warranty on this Product.
Product Installation Requirements:
Prior to installing a WhisperKOOL Product, the End User must read the WhisperKOOL Owner’s Manual and thereafter the End User must follow the required installation, use and maintenance procedures set forth by WhisperKOOL in WhisperKOOL’s Owner’s Manual.
It is the End User’s responsibility to clean off any accumulated dust, lint, or other debris from the front and rear intake grills; failure to do this on a regular basis will restrict the airflow and may affect the Product’s ability to function properly. Periodically cleaning the Product’s vents will help assure maximum cooling efficiency. The drain tube must also be checked and kept clean and free of debris and mold to maintain proper performance. Mold is a natural living organism in the environment. It exists in the air in the form of microscopic spores that move in and out of buildings through doors, windows, vents, HVAC systems and anywhere else that air enters. Once it is discovered, mold must be addressed quickly and appropriately.
Additional End User Costs And Responsibilities
The following items are not covered under any warranty and are the sole responsibility of the End User:
End Users should satisfy themselves that the Product they are purchasing is suitable for their particular needs and requirements, and thus no responsibility will be placed with WhisperKOOL for the End User’s decisions in this regard.
It is the End User’s responsibility to secure safe haven/storage for ANY AND ALL items that are being kept and stored in the End User’s wine cellar, including any Product. WhisperKOOL takes no responsibility for the safety and preservation of the aforementioned items in the event that the environment becomes unsuitable to maintain a proper storage environment.
End User is responsible for initial installation costs, including, but not limited to, labor costs and the cost of any additional parts necessary to complete the installation.
End User is responsible for all costs incurred for the installation and/or removal of the Product, or any part there-of, unless such cost has been agreed by WhisperKOOL to be a warranty repair prior to the work being performed.
Customer Service and Troubleshooting
WhisperKOOL’s customer service department is available to answer any questions or inquiries for End Users regarding a WhisperKOOL Product, as well as to assist in performing basic troubleshooting, Monday through Friday, from 6:30 a.m. to 4:00 p.m. PST, at telephone number 1-800-343-9463. WhisperKOOL Corporation is located at 1738 East Alpine Avenue, Stockton, California 95205.