Overall View of CellarPro 3200VSx-ECX Wine Cellar Refrigeration Unit
Rear View Showing Exterior Cover of CellarPro 3200VSx-ECX Wine Cellar Refrigeration Unit
CellarPro 3200VSx-ECX Wine Cellar Refrigeration Unit
Controller for CellarPro 3200VSx-ECX Wine Cellar Refrigeration Unit
Adjustable Fan Speed for CellarPro 3200VSx-ECX Wine Cellar Refrigeration Unit
Side View of CellarPro 3200VSx-ECX Wine Cellar Refrigeration System
CellarPro 3200VSx-ECX Wine Cellar Refrigeration Unit Installed Through Wall into Wine Cellar
Side View Showing Exterior Cover Attached - CellarPro 3200VSx-ECX Wine Cellar Refrigeration Unit

2000VSx-ECX Cooling Unit by CellarPro Cooling Systems

Regular price $2,650.00
/
USD
Add Ons
?
Add this option if using the bottle probe and you need to add up to 25ft of cord length.
?
Add this option if using the bottle probe and you need to add up to 50ft of cord length.
?

This option is strongly recommended for installations where the unit and its built-in display/control panel is not visible within the wine cellar. This panel will allow you to monitor and adjust unit settings from the location of your choice and is hard-wired to the unit (10 feet of wiring included – please contact us after ordering if you require extra wiring length)

?
This 100W heating element is designed to burn off excess moisture to minimize or potentially even eliminate water from entering the drain line.
?
Add this option for units that are not ducted on the hot side. Adheres to unit with magnetic strips. Avoid a future separate order when it comes time to change the disposable filter that comes with the unit.
?
Add this option if the unit's fresh air intake will be below 20°F.
?
This option is strongly recommended for the most accurate temperature measurement and is absolutely necessary when the unit is ducted into the cellar. The probe can either measure air temperature or liquid temperature inside a bottle. The probe end will cork a wine bottle to blend into your cellar. This item comes with 10 feet of cord.
?
Add this option if ducting the cold side of the unit from an adjacent space but you will provide your own 6" insulated ducting material. Maximum 25ft of ducting for each run. Adds 7 1/2" of height and 3 3/4" of depth to unit Also includes bottles probe and remote control/display panel (no need to purchase separately).
?
Add this option if ducting the cold side of the unit from an adjacent space and you'd like to have 25ft of 6" insulated ducting material included. Adds 7 1/2" of height and 3 3/4" of depth to unit Also includes bottles probe and remote control/display panel (no need to purchase separately).
?
Add this option if you want to connect your cooling unit to an Ecobee Pro thermostat (thermostat not included). Up to 10 feet of wiring is included. If you require more than 10 feet, please include a note with your order with your desired length. Unless your thermostat has a separate probe, it will need to be installed within the cooled wine cellar environment. This upgrade is not compatible with the CellarPro bottle probe add-on.
?
Add this option if you want to connect your cooling unit to a Nest or Honeywell thermostat (thermostat not included). Up to 10 feet of wiring is included. If you require more than 10 feet, please include a note with your order with your desired length. Unless your thermostat has a separate probe, it will need to be installed within the cooled wine cellar environment. This upgrade is not compatible with the CellarPro bottle probe add-on.

This unit is currently on backorder and expected to ship by mid December, 2021. Order today to join the queue and have your unit ship as soon as it's ready.

IMPORTANT: Please be sure to review the add-on options above to confirm you have all accessories necessary for your particular installation. Many are factory-installed and difficult to accommodate as a separate purchase/installation.

The CellarPro 2000VSi-ECX self-contained, through-wall wine cellar cooling unit is robust with extra-large coils,  but quiet, thanks to its upgraded EC fan. Choose from variable fan speeds: turn it to high for maximum cooling power or low for the ultimate in quiet operation.

The minimal height of this unit (13 1/5") allows it to be installed above most wine cellar doors so as to avoid impacting the wine racking layout. It also vents cold air off the face of the unit meaning wine racking installed just beneath the unit won't impact airflow.

Audible and visual alarms alert you to maintenance and operation issues, providing peace of mind that your wine collection is property protected.

This unit is designed to install between standard studs but also has the option for front or rear ducting with the addition of ducting kits or hoods. This model is intended for indoor installation. If you wish to install through an exterior wall, please choose the CellarPro 2000VSx-ECX.

All air-cooled wine cellar cooling units require fresh air intake to dissipate the heat generated by the cooling unit. The fresh air intake CANNOT come from the wine cellar space - it must come from space outside the wine cellar. Venting of the warm air produced by the cooling unit should also be to a large, well-ventilated area to avoid heat build-up.

  • Exterior weather hood protects the rear of the unit from outdoor conditions.
  • Energy-efficient EC fans with variable speed settings on both sides of the unit.
  • Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar. 
  • Excess condensate is managed with a high-capacity stainless steel condensate pan and optional 100W electric heating element (see add-ons above).
  • Commercial-grade Electrofin coating protects the evaporator coils from leaks and corrosion. 
  • Compressor heater included to allow operation in outdoor temperatures as low as 20°F (purchase the fan cycling switch add-on to to go as low as -20°F).
  • Low profile design for maximum flexibility with installation.
  • Intuitive LED display panel mounted on the unit with digital programmable thermostat is simple and easy to use. (see add-on option above for a remote display/control option).
  • Energy-saver mode, quick-chill mode, and auto-defrost cycle.
  • Temperature set point range is 47°F to 62°F when the cooling unit is installed into an appropriately sized cellar.
  • Unit operates with minimal vibrations and less noise than comparable units from competitors. 
  • Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
  • With dual power sources and a 10-foot power cord, the unit can be plugged into a receptacle from either the rear or front side of the cooling unit, providing flexibility for most installations.
  • Adjustable mounting brackets, included as standard equipment, ensure easy installation.
  • Easy-to-access disposable air filter included to protect coils from dust and debris. Purchase a re-usable air filter as an add-on and never worry about ordering replacement filters again.
  • Removable steel case and refrigerant access valve provides access to the internal components for servicing and repair.
  • ETL Tested and Certified to rigorous UL Standards for safety. 

View Configuration Diagrams

  • CellarPro 2000 VSx cooling units are self-contained and fully-charged. They are designed to be installed through and exterior wall and can be front ducted.
  • 2000 VSs units can be located remotely from the cellar with the addition of front ducting (see add-on options above). With a front ducting hood or kit, this unit can be ducted up to 50 equivalent feet away from the cellar and requires 6 inch (or greater) ducting from start to end. 
  • When calculating equivalent feet, each 90-degree turn is equal to 8 linear feet.
  • For installations where the unit is not inside the cellar, we offer a remote control and display kit which is wired to the cooling unit and can be placed inside or outside of the cellar.
  • If the fresh air intake (on the hot side) will pull air below 20°F, down to -20°F, you must add the fan cycling switch (see add-on options above).
  • The front of the cooling unit should never be situated in an area that will get below 32°F.
  • This unit must always be installed and operated in an upright position.

Cooling Capacity:

- Low Fan Speed: 1713 BTUH at 55°F
- High Fan Speed: 1886 BTUH at 55°

Sound Measurement:

- Low Fan Speed: 55.5 dBA (max 100°F intake temperature)
- High Fan Speed: 61 dBA (max 110°F intake temperature)

Dimensions:

14 3/4" w x 27 7/8” d x 13 3/8”h

Weight:
115 lbs

Power/Rating:

115V AC / 60 Hz

Compressor Amps:

- Startup (LRA): 22.2 Amps

- Unit Amp Rating: 4.52 Amps (high fan speed)

- Compatible with Dedicated 15-Amp Circuit

- Total Watts: 340 (low fan speed)

Installation Resource Documents

Owners Manual Dimensions Cut Sheet
Ducting Cut Sheet Framing Diagrams

 

 

 

 

 

 

 

 

 

 

Orders of this item are typically shipped within 4 – 8 business days via an LTL carrier, on a pallet.

Please note: If this unit is on backorder or subject to longer lead times, it will be noted in the main product description.

The pallet will be delivered to the first opening in your home (typically a garage).

This product is warrantied by Cellar Pro Cooling Systems.

For five years from the date of purchase, your CellarPro warranty covers the internal compressor if it proves to be defective in materials or workmanship. In addition, for two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship.

For all products covered by the terms of this warranty, CellarPro will repair or replace the original cooling unit with a new or refurbished cooling unit and, once replaced, the original cooling unit must be returned to CellarPro.

All service provided by CellarPro under the above warranty must be performed by CellarPro or a designated repair facility unless otherwise specified by CellarPro. Purchaser is responsible for shipping the wine cooling unit to and from CellarPro or to and from a designated repair facility, and for removing and reinstalling the wine cooling unit from the wine cellar.

The limited warranty applies only to wine cooling units purchased from the factory or an authorized dealer. Damage caused by others or by any cause beyond the control of CellarPro, shall not be considered defects in material or workmanship and are not covered by the warranty. The limited warranty does not cover any parts or labor to correct any defect caused by negligence, commercial use, accident or improper use, maintenance, installation, service or repair.

THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES, WHICH CELLARPRO WILL PROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. CELLARPRO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights, which vary from state to state.

To receive parts and/or service and the name of a CellarPro designated repair facility nearest you, contact your CellarPro dealer. You may also contact CellarPro directly by calling us at 1.877.726.8496.

 

  • Exterior weather hood protects the rear of the unit from outdoor conditions.
  • Energy-efficient EC fans with variable speed settings on both sides of the unit.
  • Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar. 
  • Excess condensate is managed with a high-capacity stainless steel condensate pan and optional 100W electric heating element (see add-ons above).
  • Commercial-grade Electrofin coating protects the evaporator coils from leaks and corrosion. 
  • Compressor heater included to allow operation in outdoor temperatures as low as 20°F (purchase the fan cycling switch add-on to to go as low as -20°F).
  • Low profile design for maximum flexibility with installation.
  • Intuitive LED display panel mounted on the unit with digital programmable thermostat is simple and easy to use. (see add-on option above for a remote display/control option).
  • Energy-saver mode, quick-chill mode, and auto-defrost cycle.
  • Temperature set point range is 47°F to 62°F when the cooling unit is installed into an appropriately sized cellar.
  • Unit operates with minimal vibrations and less noise than comparable units from competitors. 
  • Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
  • With dual power sources and a 10-foot power cord, the unit can be plugged into a receptacle from either the rear or front side of the cooling unit, providing flexibility for most installations.
  • Adjustable mounting brackets, included as standard equipment, ensure easy installation.
  • Easy-to-access disposable air filter included to protect coils from dust and debris. Purchase a re-usable air filter as an add-on and never worry about ordering replacement filters again.
  • Removable steel case and refrigerant access valve provides access to the internal components for servicing and repair.
  • ETL Tested and Certified to rigorous UL Standards for safety. 

View Configuration Diagrams

  • CellarPro 2000 VSx cooling units are self-contained and fully-charged. They are designed to be installed through and exterior wall and can be front ducted.
  • 2000 VSs units can be located remotely from the cellar with the addition of front ducting (see add-on options above). With a front ducting hood or kit, this unit can be ducted up to 50 equivalent feet away from the cellar and requires 6 inch (or greater) ducting from start to end. 
  • When calculating equivalent feet, each 90-degree turn is equal to 8 linear feet.
  • For installations where the unit is not inside the cellar, we offer a remote control and display kit which is wired to the cooling unit and can be placed inside or outside of the cellar.
  • If the fresh air intake (on the hot side) will pull air below 20°F, down to -20°F, you must add the fan cycling switch (see add-on options above).
  • The front of the cooling unit should never be situated in an area that will get below 32°F.
  • This unit must always be installed and operated in an upright position.

Cooling Capacity:

- Low Fan Speed: 1713 BTUH at 55°F
- High Fan Speed: 1886 BTUH at 55°

Sound Measurement:

- Low Fan Speed: 55.5 dBA (max 100°F intake temperature)
- High Fan Speed: 61 dBA (max 110°F intake temperature)

Dimensions:

14 3/4" w x 27 7/8” d x 13 3/8”h

Weight:
115 lbs

Power/Rating:

115V AC / 60 Hz

Compressor Amps:

- Startup (LRA): 22.2 Amps

- Unit Amp Rating: 4.52 Amps (high fan speed)

- Compatible with Dedicated 15-Amp Circuit

- Total Watts: 340 (low fan speed)

Installation Resource Documents

Owners Manual Dimensions Cut Sheet
Ducting Cut Sheet Framing Diagrams

 

 

 

 

 

 

 

 

 

 

Orders of this item are typically shipped within 4 – 8 business days via an LTL carrier, on a pallet.

Please note: If this unit is on backorder or subject to longer lead times, it will be noted in the main product description.

The pallet will be delivered to the first opening in your home (typically a garage).

This product is warrantied by Cellar Pro Cooling Systems.

For five years from the date of purchase, your CellarPro warranty covers the internal compressor if it proves to be defective in materials or workmanship. In addition, for two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship.

For all products covered by the terms of this warranty, CellarPro will repair or replace the original cooling unit with a new or refurbished cooling unit and, once replaced, the original cooling unit must be returned to CellarPro.

All service provided by CellarPro under the above warranty must be performed by CellarPro or a designated repair facility unless otherwise specified by CellarPro. Purchaser is responsible for shipping the wine cooling unit to and from CellarPro or to and from a designated repair facility, and for removing and reinstalling the wine cooling unit from the wine cellar.

The limited warranty applies only to wine cooling units purchased from the factory or an authorized dealer. Damage caused by others or by any cause beyond the control of CellarPro, shall not be considered defects in material or workmanship and are not covered by the warranty. The limited warranty does not cover any parts or labor to correct any defect caused by negligence, commercial use, accident or improper use, maintenance, installation, service or repair.

THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES, WHICH CELLARPRO WILL PROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. CELLARPRO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights, which vary from state to state.

To receive parts and/or service and the name of a CellarPro designated repair facility nearest you, contact your CellarPro dealer. You may also contact CellarPro directly by calling us at 1.877.726.8496.

 


Recently viewed