1800H-ECX Houdini Cooling Unit by CellarPro Cooling Systems
1800H-ECX Houdini Cooling Unit by CellarPro Cooling Systems
1800H-ECX Houdini Cooling Unit by CellarPro Cooling Systems
1800H-ECX Houdini Cooling Unit by CellarPro Cooling Systems
1800H-ECX Houdini Cooling Unit by CellarPro Cooling Systems
1800H-ECX Houdini Cooling Unit by CellarPro Cooling Systems
1800H-ECX Houdini Cooling Unit by CellarPro Cooling Systems

1800H-ECX Houdini Cooling Unit by CellarPro Cooling Systems

Regular price $1,995.00
/
USD
Add Ons
?
Add this option if using the bottle probe and you need to add up to 25ft of cord length.
?
Add this option if using the bottle probe and you need to add up to 50ft of cord length.
?
Add this option if ducting the cold side of the unit from an adjacent space but you will provide your own ducting material. Maximum 25ft of ducting for each run.
?
Add this option if ducting the cold side of the unit from an adjacent space and you’d like 2 x 25ft runs of insulated flexible ducting included.
?
Add this option if the units fresh air intake will be as low as 20°F. 
?
Add this option if the units fresh air intake will be below 20°F.
?
Add this option for wine cellar installations, especially those that may not be 100% air tight (eg. Frameless glass doors). This allows excess condensation to drain from the unit.
?
Add this option if ducting the hot side of the unit to another space but you will provide your own ducting material (note: if ducting fresh air intake from outdoors, add the compressor heater/compressor heart + fan cycling switch option as well). Maximum 25 ft of ducting for each run.
?
Add this option if ducting the hot side of the unit to another space and you’d like 2 x 25ft runs of insulated flexible ducting included (note: if ducting fresh air intake from outdoors, add the compressor heater/compressor heater + fan cycling switch option as well)
?
Same as the Hot Side Ducting Kit but Includes an inline fan for hot air exhaust and 2 x 50ft runs of insulated flexible ducting. Choose this option if your hot side ducting run will exceed 25 feet, up to a maximum of 50 ft.
?

This option is strongly recommended for installations where the unit and its built-in display/control panel is not visible within the wine cellar. This panel will allow you to monitor and adjust unit settings from the location of your choice and is hard-wired to the unit (10 feet of wiring included – please contact us after ordering if you require extra wiring length)

?
Add this option for units that are not ducted on the hot side. Adheres to unit with magnetic strips. Avoid a future separate order when it comes time to change the disposable filter that comes with the unit.
?
Add this option to reduce sound by 5 decibels. This caps the top of the unit and measures 10”L x 23”W x 4 3/8”H. Does not combine with ducting hoods/kits.
?
This option is strongly recommended for the most accurate temperature measurement and is absolutely necessary when the unit is ducted into the cellar. The probe can either measure air temperature or liquid temperature inside a bottle. The probe end will cork a wine bottle to blend into your cellar. This item comes with 10 feet of cord.

IMPORTANT: Please be sure to review the add-on options above to confirm you have all accessories necessary for your particular installation. Many are factory-installed and difficult to accommodate as a separate purchase/installation.

The CellarPro 1800H-ECX Houdini wine cellar cooling unit was designed with shallow, glass-enclosed wine cellars in mind. 

Just 10 1/2-inches deep and 10-inches tall, the 1800H-ECX Houdini cooling unit is designed to "disappear" inside - or atop - the cellar. Dual independent variable-speed fans allow you to choose between super-quiet operation or maximized cooling performance.

View the below sample cellar scenarios/sizes to better understand the cooling capacity of this unit*: 


Cellar Dimensions

Cellar
Cubic Ft


Glass Square Ft


Glass Type

Desired Cellar
Temp


BTUH

6'w x 2 1/2'd x 9'h

135

54 (Front Wall)

Single Pane

60F

1735

7'w x 2 1/2'd x 10'h

175

70 (Front Wall)

Double Pane

55F

1681

7'w x 2 1/2'd x 10'h

175

120 (Front & Side Walls)

Double Pane

58F

1922

*assuming 75°F ambient temperature, R13 insulation in the non-glass walls and no ducting

All air-cooled wine cellar cooling units require fresh air intake to dissipate the heat generated by the cooling unit. The fresh air intake CANNOT come from the wine cellar space - it must come from space outside the wine cellar.

Powerful fans on the 1800H-ECX wine cellar cooling unit allow for ducting of this unit with additional ducting hoods and kits (see add-on options above).

  • Energy-efficient EC fans with variable speed settings for your choice of super-quiet operation (low fan speed) or maximized cooling capacity (high fan speed)
  • Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar. 
  • Custom coils generate maximum cooling power inside the cellar. 
  • Excess condensate is managed with a high-capacity stainless steel condensate pan and 100W electric heating element. 
  • Commercial-grade Electrofin coating protects the evaporator coils from leaks and corrosion. 
  • Intuitive LED display panel mounted on the unit with digital programmable thermostat is simple and easy to use. (see add-on option above for a remote display/control option).
  • Energy-saver mode, quick-chill mode, and auto-defrost cycle.
  • Temperature set point range is 47°F to 62°F when the cooling unit is installed into an appropriately sized cellar.
  • Unit operates with minimal vibrations and less noise than comparable units from competitors. 
  • Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
  • With dual power sources and a 10-foot power cord, the unit can be plugged into a receptacle from either the rear or right side of the cooling unit, providing flexibility for most installations.
  • Mounting brackets, included as standard equipment, ensure easy installation.
  • Removable steel case provides access to the internal components for servicing and repair.
  • ETL Tested and Certified to rigorous UL Standards for safety. 

View Configuration Diagrams

 

  • CellarPro 1800H-ECX cooling units are self-contained and fully-charged. They are designed to be attached to the ceiling inside the cellar, or above the cellar.
  • 1800H-ECX units can also be located remotely from the cellar with the addition of front ducting (see add-on options above). With a front ducting hood or kit, this unit can be ducted up to 50 equivalent feet away from the cellar and requires 6-inch (or greater) ducting from start to end. 
  • When calculating equivalent feet, each 90-degree turn is equal to 8 linear feet.
  • For installations where the unit is not inside the cellar, we offer a remote control and display kit which is wired to the cooling unit and can be placed inside or outside of the cellar.
  • Houdini cooling units must have fresh air intake without interference from the unit's hot air exhaust. If sufficient space does not exist to provide fresh air, you may need to add hot side ducting.
  • If the fresh air intake (on the hot side) will receive air below below 40°F, you will require a compressor heater (see add-on options above).
  • If the fresh air intake (on the hot side) will pull air below 20°F, down to -20°F, you must add both the compressor heater and fan cycling switch (see add-on options above).
  • The cooling unit should never be situated in an area that will get below 32°F.
  • This unit must always be installed and operated in an upright position.

Cooling Capacity:

1/4 Ton Nominal

- Low Fan Speed: 1456 BTUH
- High Fan Speed: 1864 BTUH

Dimensions:

36 ½” w x 10 ½” d x 10”h

Weight:
99 lbs

Power/Rating:

115V AC / 60 Hz

Compressor Amps:

- Startup (LRA): 22.2 Amps

- Unit Amp Rating: 4.7 Amps

- Total Watts with Fans on High: 411

- Total Watts with Fans on Low: 399

- Compatible with Dedicated 15-Amp Circuit

Installation Resource Documents

Owners Manual Dimensions Cut Sheet
Spec Sheet As-Ducted Cut Sheet
Airflow Cutouts Control Locations

 

 

 

 

 

 

 

 

 

 

Orders of this item are typically shipped within 4 – 8 business days via an LTL carrier, on a pallet.

Please note: If this unit is on backorder or subject to longer lead times, it will be noted in the main product description.

The pallet will be delivered to the first opening in your home (typically a garage).

This product is warrantied by Cellar Pro Cooling Systems.

For five years from the date of purchase, your CellarPro warranty covers the internal compressor if it proves to be defective in materials or workmanship. In addition, for two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship.

For all products covered by the terms of this warranty, CellarPro will repair or replace the original cooling unit with a new or refurbished cooling unit and, once replaced, the original cooling unit must be returned to CellarPro.

All service provided by CellarPro under the above warranty must be performed by CellarPro or a designated repair facility unless otherwise specified by CellarPro. Purchaser is responsible for shipping the wine cooling unit to and from CellarPro or to and from a designated repair facility, and for removing and reinstalling the wine cooling unit from the wine cellar.

The limited warranty applies only to wine cooling units purchased from the factory or an authorized dealer. Damage caused by others or by any cause beyond the control of CellarPro, shall not be considered defects in material or workmanship and are not covered by the warranty. The limited warranty does not cover any parts or labor to correct any defect caused by negligence, commercial use, accident or improper use, maintenance, installation, service or repair.

THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES, WHICH CELLARPRO WILL PROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. CELLARPRO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights, which vary from state to state.

To receive parts and/or service and the name of a CellarPro designated repair facility nearest you, contact your CellarPro dealer. You may also contact CellarPro directly by calling us at 1.877.726.8496.

 

  • Energy-efficient EC fans with variable speed settings for your choice of super-quiet operation (low fan speed) or maximized cooling capacity (high fan speed)
  • Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar. 
  • Custom coils generate maximum cooling power inside the cellar. 
  • Excess condensate is managed with a high-capacity stainless steel condensate pan and 100W electric heating element. 
  • Commercial-grade Electrofin coating protects the evaporator coils from leaks and corrosion. 
  • Intuitive LED display panel mounted on the unit with digital programmable thermostat is simple and easy to use. (see add-on option above for a remote display/control option).
  • Energy-saver mode, quick-chill mode, and auto-defrost cycle.
  • Temperature set point range is 47°F to 62°F when the cooling unit is installed into an appropriately sized cellar.
  • Unit operates with minimal vibrations and less noise than comparable units from competitors. 
  • Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
  • With dual power sources and a 10-foot power cord, the unit can be plugged into a receptacle from either the rear or right side of the cooling unit, providing flexibility for most installations.
  • Mounting brackets, included as standard equipment, ensure easy installation.
  • Removable steel case provides access to the internal components for servicing and repair.
  • ETL Tested and Certified to rigorous UL Standards for safety. 

View Configuration Diagrams

 

  • CellarPro 1800H-ECX cooling units are self-contained and fully-charged. They are designed to be attached to the ceiling inside the cellar, or above the cellar.
  • 1800H-ECX units can also be located remotely from the cellar with the addition of front ducting (see add-on options above). With a front ducting hood or kit, this unit can be ducted up to 50 equivalent feet away from the cellar and requires 6-inch (or greater) ducting from start to end. 
  • When calculating equivalent feet, each 90-degree turn is equal to 8 linear feet.
  • For installations where the unit is not inside the cellar, we offer a remote control and display kit which is wired to the cooling unit and can be placed inside or outside of the cellar.
  • Houdini cooling units must have fresh air intake without interference from the unit's hot air exhaust. If sufficient space does not exist to provide fresh air, you may need to add hot side ducting.
  • If the fresh air intake (on the hot side) will receive air below below 40°F, you will require a compressor heater (see add-on options above).
  • If the fresh air intake (on the hot side) will pull air below 20°F, down to -20°F, you must add both the compressor heater and fan cycling switch (see add-on options above).
  • The cooling unit should never be situated in an area that will get below 32°F.
  • This unit must always be installed and operated in an upright position.

Cooling Capacity:

1/4 Ton Nominal

- Low Fan Speed: 1456 BTUH
- High Fan Speed: 1864 BTUH

Dimensions:

36 ½” w x 10 ½” d x 10”h

Weight:
99 lbs

Power/Rating:

115V AC / 60 Hz

Compressor Amps:

- Startup (LRA): 22.2 Amps

- Unit Amp Rating: 4.7 Amps

- Total Watts with Fans on High: 411

- Total Watts with Fans on Low: 399

- Compatible with Dedicated 15-Amp Circuit

Installation Resource Documents

Owners Manual Dimensions Cut Sheet
Spec Sheet As-Ducted Cut Sheet
Airflow Cutouts Control Locations

 

 

 

 

 

 

 

 

 

 

Orders of this item are typically shipped within 4 – 8 business days via an LTL carrier, on a pallet.

Please note: If this unit is on backorder or subject to longer lead times, it will be noted in the main product description.

The pallet will be delivered to the first opening in your home (typically a garage).

This product is warrantied by Cellar Pro Cooling Systems.

For five years from the date of purchase, your CellarPro warranty covers the internal compressor if it proves to be defective in materials or workmanship. In addition, for two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship.

For all products covered by the terms of this warranty, CellarPro will repair or replace the original cooling unit with a new or refurbished cooling unit and, once replaced, the original cooling unit must be returned to CellarPro.

All service provided by CellarPro under the above warranty must be performed by CellarPro or a designated repair facility unless otherwise specified by CellarPro. Purchaser is responsible for shipping the wine cooling unit to and from CellarPro or to and from a designated repair facility, and for removing and reinstalling the wine cooling unit from the wine cellar.

The limited warranty applies only to wine cooling units purchased from the factory or an authorized dealer. Damage caused by others or by any cause beyond the control of CellarPro, shall not be considered defects in material or workmanship and are not covered by the warranty. The limited warranty does not cover any parts or labor to correct any defect caused by negligence, commercial use, accident or improper use, maintenance, installation, service or repair.

THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES, WHICH CELLARPRO WILL PROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. CELLARPRO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights, which vary from state to state.

To receive parts and/or service and the name of a CellarPro designated repair facility nearest you, contact your CellarPro dealer. You may also contact CellarPro directly by calling us at 1.877.726.8496.

 


Recently viewed